Traynor Custom Valve YCV80 2x12 Combo with Celestions
(Celestion | Posted 2003-10-18)
The big daddy of Traynor's all-tube line. Nothing matches the rich, creamy distortion and complex harmonics of all-tube output. With its complement of 4 - 5881s in the power stage and 3 - 12AX7s in the pre-amp wedded to a pair of 12" Celestion 70/80 speakers, the tonality and sheer output are awe-inspiring. A Scoop switch on the lead channel adds body while an Expander switch on the clean channel opens up a range of crystalline rhythm tones. Included footswitch switches channels and activates boost. Traynor's DynaSound direct output gives the combo the sound of a miked cab for studio work. Speaker simulation on the XLR direct and headphone outputs. A speaker defeat switch is handly for silent direct recording or practice. The parallel effects loop with separate trim pots offers greater effects control while a series effects loop gives you signal path flexibility. Vintage Traynor looks with the classic front-mounted logo on a rugged vinyl-clad plywood cab with chrome corners. The recessed rear control panel is easily accessed while staying out of harm's way. 2-year warranty.
Features:
All tube design with 4 x 5881, 3 x 12AX7A Sovtek tubes
Dual 12" Celestion® 70/80 speakers
Separate tone controls for clean and drive channels
Scoop switch on lead channel for heavy 'boutique amp" lead sound
Expander switch on rhythm channel for unique variations of clean tone
Included footswitch switches channels and activates boost
DynaSound speaker-compensated XLR direct output
DynaSound compensated headphone output
Parallel effects loop with trim controls on input and output
Internal speaker defeat switch for silent practice or direct recording
DC-powered filament supply on pre-amp tubes for reduced hum
Autobalancing bias supply eliminates need for matched pairs of output tubes or bias adjustments
Long Accutronics reverb springs for authentic vintage sound
Fully regulated power supply for ultra-low noise
Conservatively driven output for extended tube life
Additional loop-through serial effects loop
Plywood cab with vinyl covering
Vintage Traynor looks with rear-mounted control panel
2-year transferable warranty
Specifications:
Type Tube Guitar Amplifier
Cabinet Program Power (Watts) 80
Cabinet Impedance (Ohms) 4
Minimum Impedance (Ohms) 2
Speaker Configuration - LF (Size/Power) 2 x 12 inch Celestion 70/80
Input Channels 2
Channel 1 - inputs 1/4 inch phone
Channel 1 - controls Gain, Volume,Treble, Mid, Bass
Channel 1 - switches Boost, Scoop
Channel 2 - inputs Shares Ch 1 input
Channel 2 - controls Volume, Treble, Mid, Bass
Channel 2 - switches Channel Select, Brightness, Expander
Channel Switching Yes
Line Out (type/configuration) Speaker Compensated XLR Balanced
Effects Volume Yes
Effects Loop/Location Yes/Rear
Effects Footswitch/Function Yes/Channel Select, Boost
Internal ReveEffects Accutronics Spring Reverb
External speaker/rear
Headphone Jack Yes
Other Features Standby Switch, Auto tube matching circuit, DC filaments on preamp tubes, Headphone jacks, Speaker defeat switch, Perforated Steel Grille
Dimensions: 26-1/2"W x 20"H x 9-1/2"W
65 lbs.
Discover the majesty 80 Class-A watts will bring to your sound. Order today!
Click below for pricing or to order yours today!
Traynor Custom Valve YCV80 2x12 Combo with Celestions
